Categories Safety, Smoke Detector

Smoke Detector Upgrades: Is It Time?

smoke detector upgrade

WiFi technology has led to enhanced home fire protection. But many homeowners still have questions about smoke alarms, including:

  • Do smoke detectors expire?
  • How many smoke detectors does my home or commercial property need?
  • Which is best: battery-powered or wired smoke detectors?
  • When is it time for smoke detector upgrades?

Reasons You Need Smoke Detector Upgrades

Your smoke detector beeps to let you know it’s time for a new battery. If you’re like three out of four people in the United States, you ignore the beep until it quits. And then you forget to change the battery.

A working smoke detector increases your chances
of surviving a home fire by 50%.

Smoke alarms are your first line of defense, so it’s critical to keep them operating efficiently. We know that. But the smoke alarm statistics say Americans are negligent in protecting our properties from fire:

  • 1 in 10 don’t have a smoke detector in their homes.
  • 16% have never tested their smoke detectors.
  • 20% have disconnected their smoke detectors.
  • Only 1 in 4 test their smoke detectors monthly.

Smoke Alarm Placement

Smoke alarm placement should ensure there are no obstructions like doors blocking the airflow. Every room has “dead air spaces” that can impede smoke alarm operation. Your professional electrician can explain each room’s best placement.

There should be a smoke detector located in:

  • Every bedroom
  • Kitchens (10´ from cooking appliances)
  • Near HVAC (heating, ventilation, air conditioning) system – locate at least 3´ from AC unit or 20´ from gas furnace
  • Outside every bedroom

High-ceiling homes and pitched-roof homes have special requirements, so check with your local electrician for proper placement.

Hardwired Smoke Detectors Required

The National Fire Protection Association (NFPA) says all home smoke alarms must be “interconnected through hardwiring or a wireless signal.” New homes are required to have hardwired smoke alarms with backup batteries. Upgrading to a hardwired smoke detector system in the Phoenix area can increase your property value, too.

A smoke detector upgrade will include the latest technology enhancements. For example, when one alarm sounds on an interconnected system, every alarm in the house goes off. Newer smoke alarms usually include a carbon monoxide detector.

Smoke Detectors Expire

Ten years is the maximum life for a residential or commercial smoke alarm. If your alarm includes a CO detector, 5-7 years is typical.

Testing smoke alarms is a service provided during your annual electrical inspection, but that’s not enough. To stay on top of your alarms’ efficiency, test them monthly. If you haven’t upgraded to wired smoke detectors, you should replace the batteries every year. Some battery-powered smoke detectors come with nonreplaceable batteries that can last up to 10 years.

What To Look For in Smoke Detector Upgrades

In Arizona, you can’t sell a property with expired (older than 10 years) smoke detectors. New homes and new renovations require hardwired, interconnected battery backup smoke detectors. Underwriters Laboratories-listed smoke alarms are also mandatory in Arizona.

There are 3 types of UL®-approved smoke detectors:

  • Dual-sensor ionization & photoelectric – This is the best protection available, especially if the unit includes carbon monoxide detection.
  • Single-sensor ionization – These detect small particles; great for fast flames but less effective for smoky fires. Because of more-than-usual false alarms, don’t mount near the kitchen/bathroom.
  • Single-sensor photoelectric – These detect larger particles; great for smoky fires but less effective for fast flames. There are fewer false alarms, so it is better to place them near the kitchen/bathroom.

Smarter is better, but if you can’t afford a high-end smoke detector, choose the best dual-sensor alarm. Single-sensor smoke alarms will eventually be phased out*, so if it’s time for a smoke detector upgrade, dual-sensor is the best investment.

Turn It On Electric specializes in whole-house smoke detector upgrades. If you have questions, contact TIO Electric.
___
*…standards for UL certification…are expected to prohibit manufacturers from producing single-sensor smoke detectors—which is even more reason to consider a dual-sensor unit. –popularmechanics.com

Categories Electrical Wiring, Safety

Electrical Fire Safety: Fall Tips

Electrical Fire Safety

Depending on your point of view, fall can be a season of endings. Summer vacations and many outdoor activities are finished for the year. Others see fall as a season of beginnings; school resumes, and plans for winter holidays are already in the works. Fall is the perfect time to prepare for more time at home and increased electrical usage. Here are 3 tips to promote electrical fire safety.

3 Electrical Fire Safety & Prevention Tips

TIO…replaced our circuit panel and upgraded our home wiring, repaired our brother’s condo wiring, and today repaired
a fire-hazard wiring fault in our rental unit. …We will
not hire anyone else in the Phoenix area.
–Sun City

In 2021, nineteen Arizona residents perished in home fires. None of those fires were caused by electrical malfunctions. However, in June, an electrical fire demolished a needy family’s donated trailer home and injured two people. One of the residents had replaced fuses in the breaker box and later saw smoke coming from the box. Smoke near an electrical outlet, switch, or fixture is one of the warning signs that you need to contact a local electrician.

You may already have an idea of some of the electrical fire safety upgrades you need. An annual electrical fire safety inspection may reveal others, including:

  • Defective outlets, plugs, and switches
  • Deterioration due to age or lack of maintenance
  • Faulty wiring installation
  • Overloaded circuits

1. Inspect Wiring Systems

If your home was built in the 1960s or early ’70s, you may need to have aluminum wiring replaced for electrical fire safety. Your home’s electrical installation also may have been altered by prior owners. If you suspect electrical rewiring was a previous owner’s DIY (do-it-yourself) project, your property may be at risk for an arc fault. (An arc fault occurs when electrical wires “leak” energized heat that can ignite wood and other nearby materials.)

A home electrical inspector will check to ensure all wiring meets current code requirements. It’s important to repair outlets or switches with wiring issues and to replace any malfunctioning electrical outlets or switches.

2. Look at the Lights

It’s romantic to put a sheer, colored scarf across a lampshade. It can instantly change the mood of a room. It can also catch fire, which changes the mood of the room even faster. The good news is, you can usually smell it burning before it ignites. The bad news is nearby combustibles like curtains can ignite quickly.

Light bulbs can be fire risks. Inspect your lights for:

  • Location – You don’t want curtains blowing into light bulbs from open windows. Look for any lamp or light fixture position that is too close to combustible materials.
  • UL® label – Underwriters Laboratories tests for electrical fire safety and approves products meeting their requirements. Only buy electronics with the UL label. Counterfeiting can occur with online purchases so be sure to know the characteristics of the UL mark.
  • Wattage – Using a safe lightbulb in any light fixture can be unsafe if the wattage is wrong.

3. Walk the Lines

Before your fall electrical inspection, walk through rooms in your homes to see if you have these fire risks:

  • Electrical cords under:
    • Bedspreads/bedding that touches the floor
    • Carpets/rugs
  • Electrical cords across:
    • Doorways
    • High-traffic areas
  • Extension cords
  • Frayed cords
  • Loose/wobbly plug-ins/outlets
  • Overloaded outlets
  • Spliced cords

Giant inflatables, animatronics, and festive lights are ways we celebrate at home. If you have electronic displays that include extension cords crossing your front yard, be sure to keep fallen leaves away from your electrical cords and hookups.

Fall is also the time of year to inspect smoke detectors. This is a basic service our Turn It On Electric technician provides during an annual electrical inspection. To schedule yours, contact TIO Electric.