Categories Residential, Safety

How to Teach Your Kids Electrical Safety

Electrical Safety

Electrical safety is a crucial topic that every parent should be teaching their younger children. With the increasing use of technology and electronic devices in our daily lives, it’s important to educate kids about the potential dangers of electricity. By teaching good electrical safety habits from a young age, you can help protect your children from accidents and promote a safe environment.

Here are some valuable tips to keep in mind when teaching your kids about electricity:

  1. Start with the Basics: Begin by explaining what electricity is and how it works. Keep the explanation simple and age-appropriate, focusing on concepts that they can easily understand. You can use examples like light bulbs, batteries, and outlets to illustrate the flow of electricity. Encourage questions and engage in a discussion to ensure their understanding.
  2. Identify Electrical Hazards: Walk around your home with your kids and identify potential electrical hazards together. Point out exposed wires, overloaded outlets, and appliances near water sources. Teach them to recognize warning signs such as sparks, unusual sounds, or the smell of burning. Make sure they understand that these hazards should be reported to an adult immediately.
  3. Safe Handling of Electrical Devices: Teach your kids how to safely handle electrical devices. Start by explaining the importance of keeping their hands dry before touching any electronic equipment. Show them how to plug and unplug devices properly, grasping the plug and not pulling the cord. Emphasize the rule of never touching electrical devices with wet hands or when standing on wet surfaces.
  4. Responsible Device Usage: Educate your children about responsible device usage. Teach them to always follow manufacturer instructions and never use devices in ways they are not intended for. Stress the importance of not leaving devices unattended, especially when charging. Encourage them to turn off and unplug devices when not in use to save energy and reduce the risk of electrical accidents.
  5. Stay Away from Power Lines: Teach your children about the danger of power lines and the importance of staying away from them. Explain that power lines carry high-voltage electricity and should never be touched or climbed. Reinforce the message that they should never fly kites, climb trees, or play near power lines.
  6. Electrical Fire Safety: Teach your kids about electrical fire safety. Show them how to use fire extinguishers properly and how to call emergency services in case of a fire. Establish a fire escape plan and practice it regularly. Make sure they understand the importance of not overloading outlets and the necessity of using surge protectors to prevent electrical fires.

As Albert Einstein said, “Electricity is not something to be afraid of. It’s something to be respected.” To delve deeper into the wonders of electricity with children and learn more about its importance and impact on our lives, you can check out Electricity Explained. This site offers a comprehensive guide to electricity, answers questions kids might have, and provides fascinating information that kids will find interesting.

Remember, teaching safety is an ongoing process. As your kids grow, continue to reinforce these lessons and adapt them to different situations. By doing so, you are instilling lifelong habits that will help keep them safe throughout their entire lives.

By teaching your kids about electrical safety, you are empowering them with knowledge and skills that will serve them well throughout their lives. Remember to be a role model and practice good electrical safety habits yourself. Together, we can create a safe and secure environment for our children.

For more information and tips on staying safe around electrical devices, feel free to contact Turn It On Electric. We can provide additional resources and professional insights to ensure the safety of your home and avoid electrical injuries.

Categories Electrical Wiring, Electrician, Residential, Safety

Avoiding Electrical Injuries

Electrical Injuries

Today’s homeowners are smarter because of the internet. How-to videos and procedures are only a click away but DIY (do-it-yourself) homeowners usually avoid electrical projects because of the risks. Here’s what you need to know about protecting your family and avoiding electrical injuries.

DIY Electrical Injuries

Completing an on-your-own project at home feels good. However, working with electricity is usually beyond the average homeowner’s skill level. Electricity is unpredictable. There are 400+ electrocutions and more than 4,000 electrical injuries every year in the United States. Most electrical injuries involve shocks or burns.

The majority of home improvement projects aren’t electrical, but they almost always involve working with electricity. The Electrical Safety Foundation International (ESFI) says 15% of electrocutions are related to consumer products and wiring hazards.

Follow these safety tips before tackling any DIY project:

  • Don’t undertake any home improvement project that is beyond your skill level or dangerous. Smart DIYers know when to call a professional.
  • If your DIY project involves electricity, don’t touch plumbing or gas pipes.
  • Learn about your home’s electrical system. In addition to property-specific information (common electrical installations the year your home was built), familiarize yourself with:
    • Electrical service panels
    • Extension cords
    • Home wiring systems
    • Outlets and receptacles
  • Take special care when working with power tools and exposed electrical wiring. Eight percent of consumer product-related electrocutions each year are attributed to electrical accidents with:
    • Drills
    • Hedge trimmers
    • Sanders
    • Saws
    • …and other electric power tools
  • Turn off the power to the circuit you’ll be working on if you attempt any electrical project. Then test the wires to make sure the power is off.
  • Unplug appliances and electrical devices you’ll be working on.

Power Tools & Electrical Safety

Never use power tools without GFCI protection. Other electrical safety tips for using power tools are:

  • Avoid using power tools with extension cords longer than 100´.
  • If your power tool trips a safety device, stop. Take the tool to a repair center.
  • Know where electrical wires are located before cutting/drilling into walls.
  • Read the manufacturer’s instructions before operating a wet/dry vac or pressure washer.
  • Use tools with insulated grips.
  • Wear appropriate personal protective equipment. (You wouldn’t mow your lawn barefoot…) Make sure you have:
    • Dust masks
    • Gloves
    • Safety goggles
    • …and all safety gear recommended by the manufacturer
  • When using power tools for cutting and drilling, know where plumbing pipes are located behind walls/under flooring.

May Is Electrical Safety Month: Protect Your Family From Electrical Risks

You never think about sappy sayings like “Home is where the heart is,” until something catastrophic happens – and it hits you where you live. Protecting your family from electrical risks is a priority.

Be sure to teach your kids:

  • Ask an adult for help using new electronics.
  • Don’t climb trees near power lines.
  • Don’t fly drones/kites near power lines.
  • Don’t plug too many things into one power strip.
  • Don’t put fingers/objects into outlets.
  • Don’t touch outdoor transformer boxes.
  • Don’t use electronics near water or with wet hands.
  • Don’t yank cords to unplug them.

There are also electrical safety websites and books, especially for children.

Always keep electrical appliances like hairdryers, toasters, coffeemakers, etc. unplugged and out of children’s reach. Turn It On Electric pros have home protection ideas for your family.

Ask us about:

  • Adding/moving electrical outlets
  • How to secure power cords
  • Installing a residual current device (RCD) safety switch
  • Minimizing extension cord use
  • Repairing/replacing damaged outlets, receptacles, and frayed wiring
  • Wiring insulation

Our most important electrical safety tip for May is to stay away from DIY electrical projects and contact TIO Electric. We welcome your questions!

Categories Safety, Smoke Detector

Smoke Detector Upgrades: Is It Time?

smoke detector upgrade

WiFi technology has led to enhanced home fire protection. But many homeowners still have questions about smoke alarms, including:

  • Do smoke detectors expire?
  • How many smoke detectors does my home or commercial property need?
  • Which is best: battery-powered or wired smoke detectors?
  • When is it time for smoke detector upgrades?

Reasons You Need Smoke Detector Upgrades

Your smoke detector beeps to let you know it’s time for a new battery. If you’re like three out of four people in the United States, you ignore the beep until it quits. And then you forget to change the battery.

A working smoke detector increases your chances
of surviving a home fire by 50%.

Smoke alarms are your first line of defense, so it’s critical to keep them operating efficiently. We know that. But the smoke alarm statistics say Americans are negligent in protecting our properties from fire:

  • 1 in 10 don’t have a smoke detector in their homes.
  • 16% have never tested their smoke detectors.
  • 20% have disconnected their smoke detectors.
  • Only 1 in 4 test their smoke detectors monthly.

Smoke Alarm Placement

Smoke alarm placement should ensure there are no obstructions like doors blocking the airflow. Every room has “dead air spaces” that can impede smoke alarm operation. Your professional electrician can explain each room’s best placement.

There should be a smoke detector located in:

  • Every bedroom
  • Kitchens (10´ from cooking appliances)
  • Near HVAC (heating, ventilation, air conditioning) system – locate at least 3´ from AC unit or 20´ from gas furnace
  • Outside every bedroom

High-ceiling homes and pitched-roof homes have special requirements, so check with your local electrician for proper placement.

Hardwired Smoke Detectors Required

The National Fire Protection Association (NFPA) says all home smoke alarms must be “interconnected through hardwiring or a wireless signal.” New homes are required to have hardwired smoke alarms with backup batteries. Upgrading to a hardwired smoke detector system in the Phoenix area can increase your property value, too.

A smoke detector upgrade will include the latest technology enhancements. For example, when one alarm sounds on an interconnected system, every alarm in the house goes off. Newer smoke alarms usually include a carbon monoxide detector.

Smoke Detectors Expire

Ten years is the maximum life for a residential or commercial smoke alarm. If your alarm includes a CO detector, 5-7 years is typical.

Testing smoke alarms is a service provided during your annual electrical inspection, but that’s not enough. To stay on top of your alarms’ efficiency, test them monthly. If you haven’t upgraded to wired smoke detectors, you should replace the batteries every year. Some battery-powered smoke detectors come with nonreplaceable batteries that can last up to 10 years.

What To Look For in Smoke Detector Upgrades

In Arizona, you can’t sell a property with expired (older than 10 years) smoke detectors. New homes and new renovations require hardwired, interconnected battery backup smoke detectors. Underwriters Laboratories-listed smoke alarms are also mandatory in Arizona.

There are 3 types of UL®-approved smoke detectors:

  • Dual-sensor ionization & photoelectric – This is the best protection available, especially if the unit includes carbon monoxide detection.
  • Single-sensor ionization – These detect small particles; great for fast flames but less effective for smoky fires. Because of more-than-usual false alarms, don’t mount near the kitchen/bathroom.
  • Single-sensor photoelectric – These detect larger particles; great for smoky fires but less effective for fast flames. There are fewer false alarms, so it is better to place them near the kitchen/bathroom.

Smarter is better, but if you can’t afford a high-end smoke detector, choose the best dual-sensor alarm. Single-sensor smoke alarms will eventually be phased out*, so if it’s time for a smoke detector upgrade, dual-sensor is the best investment.

Turn It On Electric specializes in whole-house smoke detector upgrades. If you have questions, contact TIO Electric.
___
*…standards for UL certification…are expected to prohibit manufacturers from producing single-sensor smoke detectors—which is even more reason to consider a dual-sensor unit.popularmechanics.com

Categories Electrical Wiring, Safety

Electrical Fire Safety: Fall Tips

Electrical Fire Safety

Depending on your point of view, fall can be a season of endings. Summer vacations and many outdoor activities are finished for the year. Others see fall as a season of beginnings; school resumes, and plans for winter holidays are already in the works. Fall is the perfect time to prepare for more time at home and increased electrical usage. Here are 3 tips to promote electrical fire safety.

3 Electrical Fire Safety & Prevention Tips

TIO…replaced our circuit panel and upgraded our home wiring, repaired our brother’s condo wiring, and today repaired
a fire-hazard wiring fault in our rental unit. …We will
not hire anyone else in the Phoenix area.
Sun City

In 2021, nineteen Arizona residents perished in home fires. None of those fires were caused by electrical malfunctions. However, in June, an electrical fire demolished a needy family’s donated trailer home and injured two people. One of the residents had replaced fuses in the breaker box and later saw smoke coming from the box. Smoke near an electrical outlet, switch, or fixture is one of the warning signs that you need to contact a local electrician.

You may already have an idea of some of the electrical fire safety upgrades you need. An annual electrical fire safety inspection may reveal others, including:

  • Defective outlets, plugs, and switches
  • Deterioration due to age or lack of maintenance
  • Faulty wiring installation
  • Overloaded circuits

1. Inspect Wiring Systems

If your home was built in the 1960s or early ’70s, you may need to have aluminum wiring replaced for electrical fire safety. Your home’s electrical installation also may have been altered by prior owners. If you suspect electrical rewiring was a previous owner’s DIY (do-it-yourself) project, your property may be at risk for an arc fault. (An arc fault occurs when electrical wires “leak” energized heat that can ignite wood and other nearby materials.)

A home electrical inspector will check to ensure all wiring meets current code requirements. It’s important to repair outlets or switches with wiring issues and to replace any malfunctioning electrical outlets or switches.

2. Look at the Lights

It’s romantic to put a sheer, colored scarf across a lampshade. It can instantly change the mood of a room. It can also catch fire, which changes the mood of the room even faster. The good news is, you can usually smell it burning before it ignites. The bad news is nearby combustibles like curtains can ignite quickly.

Light bulbs can be fire risks. Inspect your lights for:

  • Location – You don’t want curtains blowing into light bulbs from open windows. Look for any lamp or light fixture position that is too close to combustible materials.
  • UL® label – Underwriters Laboratories tests for electrical fire safety and approves products meeting their requirements. Only buy electronics with the UL label. Counterfeiting can occur with online purchases so be sure to know the characteristics of the UL mark.
  • Wattage – Using a safe lightbulb in any light fixture can be unsafe if the wattage is wrong.

3. Walk the Lines

Before your fall electrical inspection, walk through rooms in your homes to see if you have these fire risks:

  • Electrical cords under:
    • Bedspreads/bedding that touches the floor
    • Carpets/rugs
  • Electrical cords across:
    • Doorways
    • High-traffic areas
  • Extension cords
  • Frayed cords
  • Loose/wobbly plug-ins/outlets
  • Overloaded outlets
  • Spliced cords

Giant inflatables, animatronics, and festive lights are ways we celebrate at home. If you have electronic displays that include extension cords crossing your front yard, be sure to keep fallen leaves away from your electrical cords and hookups.

Fall is also the time of year to inspect smoke detectors. This is a basic service our Turn It On Electric technician provides during an annual electrical inspection. To schedule yours, contact TIO Electric.

Categories Electrical Wiring, Electrician

How Often Do I Need an Electrical Inspection?

Electrical Inspection

Some people say they miss “the good old days” when times were simpler. Today’s technology has us doing more faster, and it can be either overwhelming or exciting. There’s nothing simple about how much and how often we use electricity. An electrical inspection every year can tell you what your home needs today and even tomorrow.

Electrical Inspections for Safety, Upgrades

When buying a home, especially an older house, scheduling an electrical inspection is a good idea. A home’s wiring can and should last many years, but its insulation can crack with age and expose wires.

Electrical panels have an expiration date. If it’s between 20-40 years old, it’s time to plan an electrical panel replacement.

If you’re planning any major remodeling project, an electrical inspection can prevent hazards and pinpoint problem areas. Also, major renovations require permits, and your licensed electrician can make sure your wiring is installed safely as well as code-compliant. Remodeling is a good opportunity for updating and/or reconfiguring your home’s electricity.

Your home is probably your largest asset, so professional maintenance is a good investment. It not only increases your property value, but it can also give you a competitive edge in a buyers’ market. Routine electrical inspections in Arizona should be scheduled every year. Electrical maintenance can also save energy, which saves money by lowering your monthly utility bill.

3 Signs You Need an Electrical Inspection Now

Your electrical system is designed for protection. There are warning signs that indicate a problem, and some problems are more dangerous than others. Signs you need to schedule an electrical inspection right away include:

  1. Burning odor – A burning smell near any of your outlets, switches, or the circuit panel box is a major red flag. Your local electrician should be contacted immediately.
  2. Heat – If plug-in outlets, switches, or switch plates feel warm to the touch when you plug in or turn them on, there’s likely a wiring problem. If they feel warm when not in use, that’s an even bigger red flag. Schedule an electrical inspection as soon as possible.
  3. Noise – A humming, buzzing sound from any electrical outlet or switch indicates a loose connection or dangerous wiring problem.

Lesser issues that also pose dangers are flickering lights and a circuit breaker that frequently trips off and on. When you plug anything in, it’s not normal to see sparks. It could be the appliance or the outlet, but you need to have it checked out.

If you’re using extension cords in almost every room, that’s another red flag. It means you don’t have enough outlets to support your energy use. Extension cords are great as temporary fixes. But they also offer inconsistent connectivity and pose fall risks to family and visitors.

What Happens During an Electrical Inspection?

If you have noticed any problems during customary electrical usage, your local licensed electrician will examine those areas first. Other tasks during an electrical inspection may include checking for:

  • Aged/deteriorating wiring
  • DIY (do-it-yourself) wiring
  • Electrical risks
  • Exposed wires
  • Light fixtures/sockets
  • Outdated circuitry that doesn’t meet today’s codes
  • Powerbox integrity
  • Power points
  • Safety switches
  • Smoke alarms
  • Sufficient service
  • Uncovered wiring
  • …and more

A reputable electrician is licensed. But thanks to the internet, you can spot electrical service companies’ red flags as easily as the ones in your home.

Look for 5-star Angi/HomeAdvisor ratings. Look for LEED (Leadership in Energy and Environmental Design)-certified electrical professionals. And if you’re looking for knowledge, experience, and superior customer care, contact Turn It On Electric.