Categories Safety, Smoke Detector

Smoke Detector Upgrades: Is It Time?

smoke detector upgrade

WiFi technology has led to enhanced home fire protection. But many homeowners still have questions about smoke alarms, including:

  • Do smoke detectors expire?
  • How many smoke detectors does my home or commercial property need?
  • Which is best: battery-powered or wired smoke detectors?
  • When is it time for smoke detector upgrades?

Reasons You Need Smoke Detector Upgrades

Your smoke detector beeps to let you know it’s time for a new battery. If you’re like three out of four people in the United States, you ignore the beep until it quits. And then you forget to change the battery.

A working smoke detector increases your chances
of surviving a home fire by 50%.

Smoke alarms are your first line of defense, so it’s critical to keep them operating efficiently. We know that. But the smoke alarm statistics say Americans are negligent in protecting our properties from fire:

  • 1 in 10 don’t have a smoke detector in their homes.
  • 16% have never tested their smoke detectors.
  • 20% have disconnected their smoke detectors.
  • Only 1 in 4 test their smoke detectors monthly.

Smoke Alarm Placement

Smoke alarm placement should ensure there are no obstructions like doors blocking the airflow. Every room has “dead air spaces” that can impede smoke alarm operation. Your professional electrician can explain each room’s best placement.

There should be a smoke detector located in:

  • Every bedroom
  • Kitchens (10´ from cooking appliances)
  • Near HVAC (heating, ventilation, air conditioning) system – locate at least 3´ from AC unit or 20´ from gas furnace
  • Outside every bedroom

High-ceiling homes and pitched-roof homes have special requirements, so check with your local electrician for proper placement.

Hardwired Smoke Detectors Required

The National Fire Protection Association (NFPA) says all home smoke alarms must be “interconnected through hardwiring or a wireless signal.” New homes are required to have hardwired smoke alarms with backup batteries. Upgrading to a hardwired smoke detector system in the Phoenix area can increase your property value, too.

A smoke detector upgrade will include the latest technology enhancements. For example, when one alarm sounds on an interconnected system, every alarm in the house goes off. Newer smoke alarms usually include a carbon monoxide detector.

Smoke Detectors Expire

Ten years is the maximum life for a residential or commercial smoke alarm. If your alarm includes a CO detector, 5-7 years is typical.

Testing smoke alarms is a service provided during your annual electrical inspection, but that’s not enough. To stay on top of your alarms’ efficiency, test them monthly. If you haven’t upgraded to wired smoke detectors, you should replace the batteries every year. Some battery-powered smoke detectors come with nonreplaceable batteries that can last up to 10 years.

What To Look For in Smoke Detector Upgrades

In Arizona, you can’t sell a property with expired (older than 10 years) smoke detectors. New homes and new renovations require hardwired, interconnected battery backup smoke detectors. Underwriters Laboratories-listed smoke alarms are also mandatory in Arizona.

There are 3 types of UL®-approved smoke detectors:

  • Dual-sensor ionization & photoelectric – This is the best protection available, especially if the unit includes carbon monoxide detection.
  • Single-sensor ionization – These detect small particles; great for fast flames but less effective for smoky fires. Because of more-than-usual false alarms, don’t mount near the kitchen/bathroom.
  • Single-sensor photoelectric – These detect larger particles; great for smoky fires but less effective for fast flames. There are fewer false alarms, so it is better to place them near the kitchen/bathroom.

Smarter is better, but if you can’t afford a high-end smoke detector, choose the best dual-sensor alarm. Single-sensor smoke alarms will eventually be phased out*, so if it’s time for a smoke detector upgrade, dual-sensor is the best investment.

Turn It On Electric specializes in whole-house smoke detector upgrades. If you have questions, contact TIO Electric.
___
*…standards for UL certification…are expected to prohibit manufacturers from producing single-sensor smoke detectors—which is even more reason to consider a dual-sensor unit.popularmechanics.com

Categories Electrician, Residential, Smoke Detector

Installing smoke detectors at home

Most homes use battery-operated smoke detectors to alert occupants of smoke, fire, or carbon monoxide (CO). While these safety devices work fine for your home, they must be replaced per the manufacture’s specifications. Keep the following information in mind if you need to choose new devices for your home.

Options for Smoke Detector Devices

You may benefit from having certain types of smoke detectors. A few of the different options that are available for your residence include the following:

  • Hard-wired detectors: These detectors connect to your home’s electrical system rather than running on battery power. With this type of device, you don\’t have to worry about checking and replacing batteries nearly as often as they are there as a backup. These detectors work constantly when your power is on. If you lose power, they use the backup battery to keep running.
  • Wireless detectors: These smoke detectors “talk” to each other through your wi-fi connection. If one goes off it can alert the other detectors of potential danger. However, in the event the power fails and your wi-fi goes down they are not better than a single battery smoke detector.
  • Battery-powered detectors: These are usually the easiest to install and replace. Quite simply, they are better than nothing. Battery-powered smoke detectors work independently of each other and only the one that senses smoke will alarm. Batteries need to be replaced often. Some newer systems have long-life batteries that can last up to 10 years.
  • Dual purpose, smoke and CO detectors: If you have natural gas in your home, you need to have a CO detector to keep yourself, your family, and your pets safe. Many smoke detectors include a CO detector to alert you of high carbon monoxide levels in the home. Carbon monoxide can be deadly if the gas lines in your home are leaking.

Installation and Operation Requirements

No matter what type of smoke detector you choose for your home, you should have them professionally installed. Our electricians can ensure that your new detectors are properly and safely installed. With a hard-wired system, they can handle the installation process without damaging your existing wiring. We always recommend a hard-wired system as they have a longer battery life, require less maintenance, and communicate better in the event of a fire.

New smoke detectors to the market are smart home enabled and can connect to your mobile device whether you’re home or away. This can provide peace of mind knowing that you’ll always be alerted should there be a fire in your home. Some of these smart devices include CO detectors as well as improved detection to alert you sooner rather than later. With mobile alerts, everyone in your family can know if there’s a problem in your home.

Keep in mind that you’ll need to have electricians take care of maintenance and repairs if you go with hard-wired detectors. Our team can handle these tasks to ensure that your detectors continue to work properly.

Locations for Smoke Detectors

Smoke detectors need to cover the areas of your home that you spend your time in. You should have a detector installed in each room, hallway, and bedroom. Keep in mind that with a hard-wired system in place, all will sound to smoke or fire in your home right away. With a non-hardwired detector, only the detector in the affected area goes off. Other detectors won’t sound the alarm until smoke or fire reaches the area they’re in. However, the newer “smart” smoke detectors are able to wirelessly alert each other so you won’t have to be near the fire or smoke to know there’s a problem.

Professional electricians can help you determine the most suitable placement for your detectors if you’re installing new ones. This will depend on the layout of your home and other factors, such as the size.

Whether you’re installing new smoke detectors or aren’t sure if your current ones are working properly, contact Turn It On Electric today.

Categories Electrician, Residential, Smoke Detector

What to do when your smoke detector isn\’t working

What to do when your smoke detector isn't working

Smoke alarms provide a convenient and cost-effective way to ensure that you and your family are alerted if a fire occurs. This is why it’s so important to make sure that your smoke alarms are working properly. Here’s what you should do if a smoke detector isn\’t working in your home.

Testing Smoke Detectors

Your smoke detectors are a vital part of keeping you and your family safe. To make sure that yours are working right, you should test them on a regular basis. This helps ensure that you have smoke alarms that will immediately alert your household if there’s a fire.

How do you test your smoke detectors? Most have a test button that you simply push to check if your alarm is working. You should hear a beep when you press this button, which indicates that your alarm is functioning. Make a habit of testing your smoke alarms once a month. Keep in mind that you should also put new batteries in your smoke detectors every spring and fall.

Troubleshooting Your Smoke Detectors

If you test your smoke detector and don’t hear a beep from it, your first step should be replacing the batteries. With new batteries, your smoke detector should work. If you’re still not hearing any beeps, this means that something else is wrong. Your smoke detector might have reached its lifespan or it could be damaged. Either way, you should replace it with a new one as soon as you can.

What happens if your smoke detector keeps beeping without any fire present? Battery-operated detectors tend to beep every so often to let you know that they need new batteries. AC-powered smoke detectors typically beep when they’re nearing their lifespan and need to be replaced. They might also beep if they’re malfunctioning.

Keep in mind that testing the batteries when a smoke detector isn\’t working is just one step. You can test your alarms in other ways as well. For example, you can carefully light a match and blow it out while standing under a smoke alarm. The smoke that drifts up should set off the alarm. If this doesn’t happen, you should replace your smoke alarm with a brand new one.

If your smoke detectors appear dusty, you can clean them off. You should clean inside them as well to remove dust and debris that could affect the sensors. After cleaning your smoke detectors, you can test them again to see if they work. If they don’t respond to smoke or if they don’t beep after you push the test button, you need to replace them.

Replacing a Smoke Detector That Isn’t Working

If you have to replace your smoke detectors, keep in mind there are different types available. Electricians can help you determine the best type to get for your Phoenix home to protect you and your family. They can install these for you as well and ensure that you have smoke alarms properly placed around your home.

Smoke alarms generally last up to ten years. Even if you have a smoke detector that is working, you should consider replacing it if it’s getting close to reaching its lifespan.

If your smoke detectors aren’t working properly, don’t wait another minute. Contact Turn It On Electric right away.